What happens if you turn off your computer when it says not to?

Windows has taken enormous steps throughout the long term and has effectively set up a good foundation for itself as the selection of millions of clients around the world. Windows 10 and Windows 8 clients encounter startling issues with their OS quite often. The issue that they mostly experience is the "Getting Windows Ready Don't Turn Off your Computer" message on the screen. Clients report this issue on different platforms, saying it frequently happens when they turn on/off or restart/reboot their PCs. Now and again, this could take over a few hours. If you have come up with the Windows 10/11 stuck on getting Windows ready issue, here we will give you some powerful fixes.

Part 1: Why Is Getting Windows Ready Stuck?

Keep in mind, many components might be interfering with the smooth working of your PC. So, a few elements are almost certain than others to lead you to the getting Windows ready stuck situation. The following components might be interfering with the smooth working of your PC to cause this issue:

• A bad internet connection or a break in your network and speed.
• A slowly working computer system that can't prepare itself rapidly.
• If your OS hasn't been refreshed in quite a while and requires many updates to download and install.

Part 2: What Do I Do If My Computer Is Stuck on Getting Windows Ready?

Fix 1: Just Wait for Some Time

Now and again, the best thing to do is to wait. If you're not frustrated for time, consider leaving your PC for some time. It is typical for updates to take some time, particularly if your PC has some old version updates. It can also take longer if your internet connection is weak.

Try leaving your PC to refresh for the entire day. Assuming there is still no progress, the issue most likely lies in something else.

Fix 2: Check Internet Connection

As we've stated above, make your internet connection stable to get over this issue. In case you are utilizing a LAN connection, investigate your wires and switches. Turn off and plug the cable into another switch to check whether it is working. In case you are on Wi-Fi, check your router if it's working smoothly. If you believe something is still wrong, perform a troubleshoot or plug in an Ethernet cable.

Fix 3: Shut down Your PC and Power Reset It

Power resetting can clear but will not harm any data in your PC memory. It is useful for fixing a computer stuck on getting Windows ready on your PC. Using the method stated below, you can fix Windows 10/11 stuck on getting Windows ready:

Step 1: Shut down your PC and turn off every single gadget (USB drive, external drives, etc.) from it.

Step 2: Click and hold the power button for 30 seconds and remove the power cord from your device.

Step 3: Remove the battery (only if you have a laptop with a removable battery).

Step 4: Reinsert the battery and attach the power cord again to your device.

Step 5: Turn on your PC, and getting Windows ready issue might have been resolved.

Fix 4: Perform Windows 10 Startup Repair

Startup Repair is a free, convenient method in the System Recovery Options menu on your Windows OS. It assists you with naturally settling numerous complicated issues relating to the loss of data, getting Windows ready issues, and more. Follow the means beneath to get going:

Step 1: In your PC, produce a Windows Installation Media on a USB.

Step 2: Boot your PC with the USB drive and click "Repair your Computer," and select "Troubleshoot."

Step 3: Now, select "Startup Repair" on the "Advanced options" menu.

Fix 5: Delete Problematic Files

Step 1: Restart your PC to come up at the Windows Boot Options page.

Step 2: From the Boot Menu, click on "Troubleshoot" and from the Advanced Options > Command Prompt, type address.

Step 3: Type C: compact disc Windows\System32\LogFiles\Srt. SrtTrail.txt in the command line and press "Enter."

Step 4: If something like "Boot critical file c:\windows\system32\drivers\vsock.sys is corrupt" appears, go to that location utilizing the Command Prompt and enter the Del command.

Fix 6: Uninstall Recently Installed Update in Safe Mode

A faulty update may interrupt Windows functioning, so uninstalling these updates in Safe Mode may fix the issue:

Step 1: Open the Advanced options page, then, at that point, click "Startup Settings" and press "F4" to get to the Safe Mode.

Step 2: In Windows 10 Safe Mode, right-click Start > Control Panel > Programs and Features.

Step 3: From the left panel, select the recent updates and uninstall them to fix the laptop stuck on getting Windows ready issue. At last, restart Windows 10/11 to see if the problem resolves.

Fix 7: Perform a System Restore or Reset

Factory Reset deletes the copy of Windows on your PC. To do so:

Step 1: From the Windows Boot Options menu, go to Troubleshoot > Advanced Options > System Restore.

Step 2: Replicate the Wizard guidance and pick a proper location. At last, click "Finish" to restore the Windows.

If this last technique comes up short, there isn't anything that can fix the "Windows getting ready" issue other than reinstalling Windows 10 from scratch.

Tips: Factory resetting will erased files on your hard drive, to recover lost or deleted data from computers, you can try hard drive data recovery tool. And you can move to Part 3 for the details.

Fix 8: Perform a Clean Windows Installation

If nothing from the above techniques can assist you with the solution of getting Windows ready issue, the OS might have unfixable issues. The last thing to do is install a new Windows.

Windows installation will eradicate a portion of your documents. Subsequently, ensure you have backed up your precious data from the system hard drives or the Desktop.

Part 3: How to Recover Lost Data from Windows When Fixing Getting Windows Ready Issue?

One of the ways of fixing the computer stuck on getting windows ready issue is to reset the system. Before the reset, you better backup all your essential data. But if you don't make a backup and lost your data, you can get it back any time with Tenorshare 4DDiG Data Recovery by following the steps below:

• Recover files lost due to computer errors, accidental deletion, formatting, lost partition, corruption, crashed system, virus-attack, and so on.
• Recover data from laptop/PC, internal & external drive, USB flash disk, SD card, etc.
• Recover 1000+ file types including photos, videos, documents, and audio.
• Support photo and video repair.
• Higher success rate than competitors.
• Only three easy steps, even for non-techies.

• Step 1:Select a Local Disk

After installing Tenorshare 4DDiG, you will go to the home interface that shows Devices and Drives. For your situation, pick the disk drive from where you lost your data and click "Start" to continue.

• Step 2:Scan and Preview the Files

4DDiG quickly checks the drive to uncover the lost files all around. Then, you can see the filtering result, which shows the number of documents that have been found. If you can't track your desired files, you can try the "Deep Scan" option.

• Step 3:Recover the Lost Data

Eventually, you can click Recover to save desired files to a safe location which should be different from its original path in case of permanently data loss in the future.

Part 4: FAQs about Windows Getting Stuck

1. How do I fix a stuck loading computer?

If your PC is stuck at the loading screen, you can:

• Try Windows Safe Mode.
• Unplug your battery.
• Unplug all external devices.
• Try an antivirus scan.
• Make use of System Restore or Startup Repair.

2. What to do if Windows restart is stuck?

If Windows takes forever to restart, try unplugging all the external devices and battery (in the case of a laptop) from your computer. That will force shut down your PC.

3. How do I fix Windows 10/11 stuck when ready?

Turn it off and wait for 20 seconds. In the case of a laptop, remove the battery, unplug it from the Internet (turn off Wi-Fi). Now plug it once more to see if the PC starts.

4. How long should I wait for getting Windows Ready?

It is better to stand by persistently for around 2-3 hours. After the timeframe, if the problem persists, quit pausing and continue to investigate using the above fixes.

Conclusion:

Delaying out in a "getting Windows ready" is a troublesome issue without a doubt. Significantly more so when you have a deadline to meet. We hope that one of the techniques recorded above will get the job done for you. If you lose any of your important data during the process, you can get it back using the Tenorshare 4DDiG Data Recovery Software by following 3 simple steps. 4DDiG is the most reliable and highly recommended option for everyone due to its features and benefits.

You May Also Like

What happens if I turn off my computer while it says not to?

What happens if I turn off my computer when it says getting Windows ready?

What happens if you turn off your computer during a restart?

Does turning your computer off damage it?