Unlike relative dating methods, absolute dating methods provide chronological estimates of the age of certain geological materials associated with fossils, and even direct age measurements of the fossil material itself. To establish the age of a rock or a fossil, researchers use some type of clock to determine the date it was formed. Geologists commonly use radiometric dating methods, based on the natural radioactive decay of certain elements such as potassium and carbon, as reliable clocks to date ancient events. Geologists also use other methods - such as electron spin resonance and thermoluminescence, which assess the effects of radioactivity on the accumulation of electrons in imperfections, or "traps," in the crystal structure of a mineral - to determine the age of the rocks or fossils. All elements contain protons and neutrons, located in the atomic nucleus, and electrons that orbit around the nucleus (Figure 5a). In each element, the number of protons is constant while the number of neutrons and electrons can vary. Atoms of the same element but with different number of neutrons are called isotopes of that element. Each isotope is identified by its atomic mass, which is the number of protons plus neutrons. For example, the element carbon has six protons, but can have six, seven, or eight neutrons. Thus, carbon has three isotopes: carbon 12 (12C), carbon 13 (13C), and carbon 14 (14C) (Figure 5a). Figure 5: Radioactive isotopes and how they decay through time. (a) Carbon has three isotopes with different numbers of neutrons: carbon 12 (C12, 6 protons + 6 neutrons), carbon 13 (C13, 6 protons + 7 neutrons), and carbon 14 (C14, 6 protons + 8 neutrons). C12 and C13 are stable. The atomic nucleus in C14 is unstable making the isotope radioactive. Because it is unstable, occasionally C14 undergoes radioactive decay to become stable nitrogen (N14). (b) The radioactive atoms (parent isotopes) in any mineral decay over time into stable daughter isotopes. The amount of time it takes for half of the parent isotopes to decay into daughter isotopes is known as the half-life of the radioactive isotope. Most isotopes found on Earth are generally stable and do not change. However some isotopes, like 14C, have an unstable nucleus and are radioactive. This means that occasionally the unstable isotope will change its number of protons, neutrons, or both. This change is called radioactive decay. For example, unstable 14C transforms to stable nitrogen (14N). The atomic nucleus that decays is called the parent isotope. The product of the decay is called the daughter isotope. In the example, 14C is the parent and 14N is the daughter. Some minerals in rocks and organic matter (e.g., wood, bones, and shells) can contain radioactive isotopes. The abundances of parent and daughter isotopes in a sample can be measured and used to determine their age. This method is known as radiometric dating. Some commonly used dating methods are summarized in Table 1. The rate of decay for many radioactive isotopes has been measured and does not change over time. Thus, each radioactive isotope has been decaying at the same rate since it was formed, ticking along regularly like a clock. For example, when potassium is incorporated into a mineral that forms when lava cools, there is no argon from previous decay (argon, a gas, escapes into the atmosphere while the lava is still molten). When that mineral forms and the rock cools enough that argon can no longer escape, the "radiometric clock" starts. Over time, the radioactive isotope of potassium decays slowly into stable argon, which accumulates in the mineral. The amount of time that it takes for half of the parent isotope to decay into daughter isotopes is called the half-life of an isotope (Figure 5b). When the quantities of the parent and daughter isotopes are equal, one half-life has occurred. If the half life of an isotope is known, the abundance of the parent and daughter isotopes can be measured and the amount of time that has elapsed since the "radiometric clock" started can be calculated. For example, if the measured abundance of 14C and 14N in a bone are equal, one half-life has passed and the bone is 5,730 years old (an amount equal to the half-life of 14C). If there is three times less 14C than 14N in the bone, two half lives have passed and the sample is 11,460 years old. However, if the bone is 70,000 years or older the amount of 14C left in the bone will be too small to measure accurately. Thus, radiocarbon dating is only useful for measuring things that were formed in the relatively recent geologic past. Luckily, there are methods, such as the commonly used potassium-argon (K-Ar) method, that allows dating of materials that are beyond the limit of radiocarbon dating (Table 1).
Radiation, which is a byproduct of radioactive decay, causes electrons to dislodge from their normal position in atoms and become trapped in imperfections in the crystal structure of the material. Dating methods like thermoluminescence, optical stimulating luminescence and electron spin resonance, measure the accumulation of electrons in these imperfections, or "traps," in the crystal structure of the material. If the amount of radiation to which an object is exposed remains constant, the amount of electrons trapped in the imperfections in the crystal structure of the material will be proportional to the age of the material. These methods are applicable to materials that are up to about 100,000 years old. However, once rocks or fossils become much older than that, all of the "traps" in the crystal structures become full and no more electrons can accumulate, even if they are dislodged. Absolute dating is the process of determining an age on a specified chronology in archaeology and geology. Some scientists prefer the terms chronometric or calendar dating, as use of the word "absolute" implies an unwarranted certainty of accuracy.[1][2] Absolute dating provides a numerical age or range, in contrast with relative dating, which places events in order without any measure of the age between events.
In archaeology, absolute dating is usually based on the physical, chemical, and life properties of the materials of artifacts, buildings, or other items that have been modified by humans and by historical associations with materials with known dates (such as coins and historical records). For example, coins found in excavations may have their production date written on them, or there may be written records describing the coin and when it was used, allowing the site to be associated with a particular calendar year. Absolute dating techniques include radiocarbon dating of wood or bones, potassium-argon dating, and trapped-charge dating methods such as thermoluminescence dating of glazed ceramics.[3] In historical geology, the primary methods of absolute dating involve using the radioactive decay of elements trapped in rocks or minerals, including isotope systems from younger organic remains (radiocarbon dating with 14 Radiometric dating is based on the known and constant rate of decay of radioactive isotopes into their radiogenic daughter isotopes. Particular isotopes are suitable for different applications due to the types of atoms present in the mineral or other material and its approximate age. For example, techniques based on isotopes with half-lives in the thousands of years, such as carbon-14, cannot be used to date materials that have ages on the order of billions of years, as the detectable amounts of the radioactive atoms and their decayed daughter isotopes will be too small to measure within the uncertainty of the instruments.
One of the most widely used and well-known absolute dating techniques is carbon-14 (or radiocarbon) dating, which is used to date organic remains. This is a radiometric technique since it is based on radioactive decay. Cosmic radiation entering Earth's atmosphere produces carbon-14, and plants take in carbon-14 as they fix carbon dioxide. Carbon-14 moves up the food chain as animals eat plants and as predators eat other animals. With death, the uptake of carbon-14 stops.
It takes 5,730 years for half the carbon-14 to decay to nitrogen; this is the half-life of carbon-14. After another 5,730 years, only one-quarter of the original carbon-14 will remain. After yet another 5,730 years, only one-eighth will be left.
By measuring the carbon-14 in organic material, scientists can determine the date of death of the organic matter in an artifact or ecofact.
The relatively short half-life of carbon-14, 5,730 years, makes dating reliable only up to about 60,000 years. The technique often cannot pinpoint the date of an archeological site better than historic records but is highly effective for precise dates when calibrated with other dating techniques such as tree-ring dating.
An additional problem with carbon-14 dates from archeological sites is known as the "old wood" problem. It is possible, particularly in dry, desert climates, for organic materials such as dead trees to remain in their natural state for hundreds of years before people use them as firewood or building materials, after which they become part of the archaeological record. Thus, dating that particular tree does not necessarily indicate when the fire burned or the structure was built. For this reason, many archaeologists prefer to use samples from short-lived plants for radiocarbon dating. The development of accelerator mass spectrometry (AMS) dating, which allows a date to be obtained from a very small sample, has been very useful in this regard. Potassium-argon datingOther radiometric dating techniques are available for earlier periods. One of the most widely used is potassium–argon dating (K–Ar dating). Potassium-40 is a radioactive isotope of potassium that decays into argon-40. The half-life of potassium-40 is 1.3 billion years, far longer than that of carbon-14, allowing much older samples to be dated. Potassium is common in rocks and minerals, allowing many samples of geochronological or archeological interest to be dated. Argon, a noble gas, is not commonly incorporated into such samples except when produced in situ through radioactive decay. The date measured reveals the last time that the object was heated past the closure temperature at which the trapped argon can escape the lattice. K–Ar dating was used to calibrate the geomagnetic polarity time scale.
Thermoluminescence testing also dates items to the last time they were heated. This technique is based on the principle that all objects absorb radiation from the environment. This process frees electrons within minerals that remain caught within the item. Heating an item to 500 degrees Celsius or higher releases the trapped electrons, producing light. This light can be measured to determine the last time the item was heated. Radiation levels do not remain constant over time. Fluctuating levels can skew results – for example, if an item went through several high radiation eras, thermoluminescence will return an older date for the item. Many factors can spoil the sample before testing as well, exposing the sample to heat or direct light may cause some of the electrons to dissipate, causing the item to date younger. Because of these and other factors, Thermoluminescence is at the most about 15% accurate. It cannot be used to accurately date a site on its own. However, it can be used to confirm the antiquity of an item. Optically stimulated luminescence (OSL)Optically stimulated luminescence (OSL) dating constrains the time at which sediment was last exposed to light. During sediment transport, exposure to sunlight 'zeros' the luminescence signal. Upon burial, the sediment accumulates a luminescence signal as natural ambient radiation gradually ionises the mineral grains. Careful sampling under dark conditions allows the sediment to be exposed to artificial light in the laboratory which releases the OSL signal. The amount of luminescence released is used to calculate the equivalent dose (De) that the sediment has acquired since deposition, which can be used in combination with the dose rate (Dr) to calculate the age. The growth rings of a tree at Bristol Zoo, England. Each ring represents one year; the outside rings, near the bark, are the youngest. Dendrochronology or tree-ring dating is the scientific method of dating based on the analysis of patterns of tree rings, also known as growth rings. Dendrochronology can date the time at which tree rings were formed, in many types of wood, to the exact calendar year. Dendrochronology has three main areas of application: paleoecology, where it is used to determine certain aspects of past ecologies (most prominently climate); archaeology, where it is used to date old buildings, etc.; and radiocarbon dating, where it is used to calibrate radiocarbon ages (see below). In some areas of the world, it is possible to date wood back a few thousand years, or even many thousands. Currently, the maximum for fully anchored chronologies is a little over 11,000 years from present.[4] Amino acid dating is a dating technique[5][6][7][8][9] used to estimate the age of a specimen in paleobiology, archaeology, forensic science, taphonomy, sedimentary geology and other fields. This technique relates changes in amino acid molecules to the time elapsed since they were formed. All biological tissues contain amino acids. All amino acids except glycine (the simplest one) are optically active, having an asymmetric carbon atom. This means that the amino acid can have two different configurations, "D" or "L" which are mirror images of each other. With a few important exceptions, living organisms keep all their amino acids in the "L" configuration. When an organism dies, control over the configuration of the amino acids ceases, and the ratio of D to L moves from a value near 0 towards an equilibrium value near 1, a process called racemization. Thus, measuring the ratio of D to L in a sample enables one to estimate how long ago the specimen died.[10]
The Wikibook Historical Geology has a page on the topic of: Concepts in absolute dating
The Wikibook Historical Geology has a page on the topic of: Absolute dating: an overview
|