How to fix broken aerosol spray nozzle

Did you know that Lysol cans have a built-in mechanism to prevent them from spraying accidentally? If your can isn’t working, it may be because this mechanism has been engaged. This blog post will show you how to fix a lysol can that won’t spray so that it will spray again.

A Lysol can that doesn’t spray can be a major inconvenience. Luckily, there are a few things you can do to try to fix the problem. This blog post will outline some simple solutions to get your Lysol cans spraying again. Keep reading for more information!

10 Effective Ways on How to Fix a Lysol Can That Won’t Spray

1. Pull Up on the Plastic Button:

Take a pair of pliers and pull up on the plastic button that popped off. Once it’s loose, you should be able to push it back into place. If it doesn’t feel secure enough, use a little tape or glue from a hot glue gun.

2. Soak the Button in Hot Water:

Take a bowl of boiling hot water, drop the button into it for a few seconds, pull it out, and push the button back down until it’s secure. Let it cool completely before you spray anything with Lysol inside.

3. Fix the Button with a Rubber Band:

If you don’t have pliers and your button is still secure, try taking a rubber band and carefully wrapping it around the button. It might take a few tries, but eventually, you’ll have enough tension to hold everything in place.

4. Use an Empty Toothpaste Tube:

Take a piece of sandpaper and sand down one side of the toothpaste tube to be flat. Next, take your sanded side and put it against the plastic button, then push until it snaps back into place. You can also use hot glue for this method.

Sometimes, all you need is a little extra pressure on your button. Put some heavy items on top of the Lysol container to weigh them down. This will press the button back into place and let you spray Lysol again.

6. Fix With Sandpaper:

You can also use sandpaper to fix your broken Lysol sprayer. Take a piece of fine-grain sandpaper (or even fine sandpaper on a piece of heavy cardboard) and wrap it around the bottom of your Lysol can. Ensure the sandpaper is tucked in securely, then take it off and test out your sprayer.

7. Clean the Nozzle:

If you don’t know the problem, your nozzle might just be clogged. Take a paper clip, straighten it out, push it through the nozzle, and pull it back out. This will clear any built-up gunk and get your Lysol can spraying again.

8. Pour in Some Water:

If your Lysol can have been sitting for a while, you know that water can get inside it from being stored in the bathroom cabinet. All you need to do is pour out the water and then try your sprayer again.

9. Use an Empty Windex Bottle:

Windex bottles are designed for this purpose. If you take off the top of your empty Windex bottle, you’ll see that the nozzle is almost exactly like your Lysol can. So, if you’re out of ideas, take it off and use your Windex bottle instead.

10. Shake the Can Properly:

You might be shaking your Lysol can the wrong way. To get it to spray, you need to press down and move slightly from side to side simultaneously. If this doesn’t work, you should shake the entire thing up and down instead; it’s a little more inconvenient but worth a shot if nothing else has worked for you.

Some Helpful Tips and Suggestions

Some helpful tips on how to fix a lysol can that won’t spray.

1. If Lysol won’t spray, first carefully remove the child safety device.

2. Next, pull off the top of the can of Lysol. Sometimes this will correct an intermittent problem with a stuck actuator button that is not being pushed down enough by the plunger to let out all of the contents of the can.

3. Soaking a Lysol can that won’t spray in hot water for a few hours before using it may sometimes help. This will help the propellant fluid from the base of the can to mix better with the contents.

4. If the top of the can is removed and it still won’t spray, some Lysol may be left in the bottom of the can. Take a pointed object like an ice pick or screwdriver to puncture two or three holes in this remaining liquid. This will allow any liquid that remains to drain out.

5. If nothing else helps, throw the can away. It should be taken to a hazardous waste disposal site or a local landfill where it won’t harm anyone if it leaks.

6. Don’t throw the Lysol can in the trash because this may cause an explosion when the trash is compacted (slammed down) by garbage trucks.

7. Do not puncture the propellants in aerosol cans; this will cause them to explode.

8. If you are having trouble with spray cans containing non-refrigerated liquefied gas, then put on some rubber or latex gloves and open up all valves by rotating the pin counterclockwise while holding down the button that is located on the side of the can.

Common Mistakes to Avoid When Using a Lysol Spray Can

1. Shake can before using.

2. Keep the nozzle and stem clean and free of debris, so it sprays properly.

3. Make sure you have a steady hand when spraying because it’s easy to accidentally push the nozzle inside the can, thus creating more problems than solving them.

4. Wait until the can is cool to the touch before proceeding with your cleaning.

5. Clean all parts of the nozzle, stem, and metallic cap thoroughly regularly for best results.

6. Store Lysol cans flat on their side or upright at room temperature in a clean environment away from direct sunlight to prevent the can from rusting and drying out.

7. Read the manufacturer’s instructions before attempting to fix a lysol can.

8. Make sure you have all the necessary parts available for your specific model before proceeding with any repairs, as some models require multiple parts for proper usage.

How Does a Lysol Spray Nozzle Work

A Lysol can consist of a solution, water, propellant gas, and the nozzles that spray the solution. The nozzles are located at the end of thin hollow tubes that mix the fuel with the liquid within the canister and convert it into tiny droplets by forcing it through small holes. These tiny droplets are very light, allowing them to be sprayed over a large distance.

The structure of the nozzle consists of multiple small parallel tubes that form a ring with very small holes at either side of each tube. When you press down on the top of the can, it pushes the liquid up through one or more tubes. The liquid is forced out of the tube by air pressure and surface tension pulling on the liquid exiting each tube.

Why Do Spray Cans Stop Working

It is inevitable for spray cans to stop working at one point. There are several reasons why this can happen, including:

1. The gas inside the product has been lost due to excessive shaking or exposure to air, making it unable to be sprayed.

2. The can has been exposed to cold air for too long, causing the pressure inside the can to drop.

3. There is a build-up of sticky liquid on the spray nozzle that cannot be removed by simply shaking it.

4. The spray nozzle has become clogged due to a build-up of dried liquid or solid residues from the product itself.

5. There is a blockage within the nozzle blocking it from being able to spray when it reaches temperature.

How Do You Unclog a Lysol Spray

If you own a Lysol can that won’t spray, then you are probably wondering if the product is defective or if there is something that can be done to fix it. Fortunately for you, bad spraying cans aren’t very common; but they happen occasionally. Fortunately for us all, most of these clogs are easy to unclog.

In most cases, the clog is inside the spray nozzle, which can be easily removed from the top of the can. The first step is to place the can upside-down on a flat surface. Then, remove the black cap from the top of the can; you might need to tap it out gently. Inside, you should see a small straw sticking up from a hole in the threaded neck of the can. That’s your nozzle.

You Can Check It Out to: Fix Wind Noise From Car Door

Conclusion

The Lysol can that won’t spray is a frustrating problem for people to deal with. Luckily, there are some steps you can take to troubleshoot this issue and get your product working again. First, you will need to disassemble the nozzle by removing it from its housing on the canister body. Next, clean out any debris clogging up the nozzle carefully so you don’t damage it or allow anything else into where they shouldn’t be going.

Once everything has been cleaned off, reattach the nozzle onto the top of the container’s metal cylinder before putting back together what was taken apart during cleaning. We hope this blog post provided you with solutions on how to fix a lysol can that won’t spray. If you have any questions or want to learn more, then feel free to comment below!

You Can Check It Out to: Fix Digital Tap Triggers